SenHuan Mars 3x3

not a very good cube. The corner pieces are squared-off, and that causes them to hit the center while moving, which is greatly annoying. It's also very sluggish and not good by any way. I got it in teal as I didn't have a teal cube, and it's only for collection purposes. There are better options

I’ve had this cube for a 2 weeks for far and I like it.

ootb it was very sandy, I solved till it went away and added about 4 drops of mfg m-lube. It is a very fast cube, also very catchy and flexible. Within the same day I magnetized the cube with n50 magnets. I lubed the core with traxxas 10k and lubed the pieces with weight 2 and m lube. With the magnets the cube is more stable than ootb but still pretty floppy. The pieces resemble a MF3RS, The instability is also similar to the MF3RS on looser tensions.

Final thoughts,

This cube is OK but requires some modding and setup. I’m kinda sad to see it discontinued but it is a bad cube w/o set up. Should you get it? Sure but don’t expect to much

Ive had this cube for a 2 weeks for far and I like it.

ootb it was very sandy, I solved till it went away and added about 4 drops of mfg m-lube. It is a very fast cube, also very catchy and flexible. Within the same day I magnetized the cube with n50 magnets. I lubed the core with traxxas 10k and lubed the pieces with weight 2 and m lube. With the magnets the cube is more stable than ootb but still pretty floppy. The pieces resemble a MF3RS, The instability is also similar to the MF3RS on looser tensions.

Final thoughts,

This cube is OK but requires some modding and setup. Im kinda sad to see it discontinued but it is a bad cube w/o set up. Should you get it? Sure but dont expect to much

Out of the box this cube is unstable, fast, and crunchy. I Have broken mine in and it is smooth, but it still retains its fast feeling. I would recommend this cube to you if you like setting up cubes, and if you are looking for something fast but smooth. I used lubicle silk and dnm-37.

Out of the box this cube wasn't very good.... After some weight 4 on the core along with three drops of silk and some weight 2 on the pieces it became amazing. Finding the right tensions on this cube was a nightmare. It took me at least an hour but it was worth the work. There is a fine line between too tight and too lose and that line on this cube is paper thin. Once I finally found the tensions that I like I used this cube to get my P.B. average of 11.24 on my first try. This cube is a steal for $5 and I highly recommend it if you are willing to put forth the effort to set it up.

Its a really clicky cube, out of the box it was really nice, after setting up, it almost was as good as my main GTS, It felt like my GTS too, over all I rate it 4/5 because it was really clicky

This puzzle is on sale for a reason, the one I got (teal) is the lockiest non-rubik's brand cubes I've used. I tried loosening, tightening, tightening again, I don't have any lube though so I'll most likely update this if I can get any difference in preformance but it's not looking bright. Although I'm am glad to add this to my collection, if I turn VERY accurately it functions but not very quickly but that's not what I need from a mostly decorational colored puzzle. (Any tips on set up of more than just this cube email me @ hswiggum@gmail.com)

It Is Bad. Ehhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

Out of the box this cube was very clicky and fast. It was also a little unstable and uncontrollable, although I didn't find it to be too much of an issue. After break-in and tensioning, this cube got smoother while maintaining some of its click and also was significantly more controllable, but still very fast. Though I have not lubed this cube yet, I'm not sure if I will need to because it might become overly fast. Corner cutting is great. It's well over 45 degrees for normal and almost the same for reverse. Now about that downside I was talking about earlier. This cube is 90 grams, making it the heaviest 3x3 (apart from a Rubik's brand) I've ever felt. Not all people may find this an issue, but I do find it to make the cube feel heavy at time after I've been using a lighter cube. Overall I would recommend this to anyone who is likes clicky cubes with a minor hollow feeling (I forgot to mention that earlier) such as the Cong's Design MeiYing. I would say overall that this cube is like a cross between the MeiYing, the Weilong GTS, the YueXiao, and the hollow feeling reminds me a bit of a cheaper cube like the Guanlong, but that doesn't really matter as long as you like that hollow feeling. UPDATE: So, I wrote that the reverse corner cutting is the same as the forward, but what I meant is that it's the same as in really good.

This cube is an exact copy of the GTS, from the feel to the looks, to the packaging and pieces. It is really good and cheap at only $10 instead of the weilon GTS's $17 pricetag, but personally, the Weilong GTS is still my main. I will say that it has become worse ove time. It became really heavy after I put magnets in it. Here is my tutorial- https://youtu.be/dmHMxfuelh4